"6061-T6 BILLET ALUMINUM"

VALVE COVER

*FULLY MACHINED FROM SOLID STOCK!*

NOTE: (THE EXAMPLE SHOWN BELOW "HAS NOT" BEEN CHROME PLATED!)

*MULTIPLE 1/2" TALL X 1/8" THK. COOLING FINS*

*MACHINED GASKET RETAINER*

*THREADED FILLER CAP*

*HIGH QUALITY RUBBER SEALS THROUGHOUT*

 

 

FINISHES:

 

ANODIZED, (choose your color)...POLISHED FILLER CAP & VENT NIPPLE...

FULLY POLISHED..."BRIGHT"

AS MACHINED...(shown below)

 

EVERYTHING NEEDED FOR THE INSTALLATION IS INCLUDED...With Spares...

CONTENTS:

1)    Qty: (1)    Fully Machined Valve Cover.

2)    Qty: (1)    Fully Machined, (Threaded), Filler Cap.

3)    Qty: (1)    Fully Machined Vent Tube.

4)    Qty: (1)    9/16" Aluminum wrench.

5)    Qty: (3)    Rubber Valve Cover Gaskets.

6)    Qty: (9)    Rubber Stud Sealing "O"-Rings.

7)    Qty: (3)    Filler Cap "O"-Rings.

8)    Qty: (3)    Specially Machined Mounting Studs.

9)    Qty: (3)    Stainless Steel Washers.

10)  Qty: (3)    Stainless Steel Cap Nuts.

 

 

THE MACHINED PARTS IN THE VALVE COVER SET SHOWN ABOVE ARE "AS MACHINED", WITH A 15 MINUTE RUB-DOWN TO REMOVE THE WATER SPOTS.

THERE IS NOTHING EQUAL TO "THE LOOK" OF MACHINED BILLET!

THE MOUNTING STUDS HAVE BEEN PRECISELY MACHINED TO PROVIDE A PERFECT "CRUSH" FOR THE SEALING RINGS AND PRIMARY GASKET.

THIS COVER DOES NOT LEAK OIL!

 

 

A MACHINED ALUMINUM WRENCH IS INCLUDED FOR SERVICING THE VENT TUBE.

 

THE VENT BAFFLE IS MACHINED INTO THE COVER.

BAFFLE MATERIAL, AVAILABLE AT ANY AUTO PARTS STORE IS USED.

WHEN DIRTY SIMPLY REMOVE THE NIPPLE WITH THE SUPPLIED WRENCH AND PULL THE BAFFLE MATERIAL OUT WITH NEEDLE NOSE PLIERS!